Ngân hàng đề — Microsoft Azure Networking

Tìm thấy 109 câu.

Câu 101 Design and implement core networking infrastructure

A retail company runs workloads in several Azure virtual networks. Today the company enables NSG flow logs on every network security group, which are attached at both the subnet and the network interface level, and the team spends significant effort keeping the flow log configuration complete. The company has started using Azure Virtual Network Manager security admin rules and virtual network encryption, and the security team needs the flow records to show which traffic was allowed or denied by security admin rules and whether each flow was encrypted. The company also wants a solution that will not be affected by the announced retirement of NSG flow logs. What should the network engineer do?

  1. A Enable virtual network flow logs in Azure Network Watcher at the virtual network scope and disable the existing NSG flow logs on the same workloads.
  2. B Upgrade all existing NSG flow logs to version 2 so that they record flow state and throughput information.
  3. C Configure diagnostic settings on each virtual network to send all logs to a Log Analytics workspace.
  4. D Create a Network Watcher connection monitor between the subnets and export the results to Azure Storage.
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Đề nêu ba nhu cầu: (1) giảm công sức duy trì cấu hình flow log khi NSG nằm ở cả subnet lẫn NIC, (2) ghi nhận được quyết định của Azure Virtual Network Manager security admin rules và trạng thái mã hoá của luồng khi dùng virtual network encryption, (3) không phụ thuộc vào tính năng sắp ngừng. Đây là bài so sánh NSG flow logs với virtual network flow logs trong Network Watcher.

✅ Vì sao đáp án đúng là đúng

Virtual network flow logs bật ở phạm vi virtual network và ghi mọi luồng qua các workload được hỗ trợ trong VNet đó, nên không cần bật ở nhiều tầng như NSG flow logs (vốn phải bật trên cả NSG ở subnet và NSG ở NIC để không sót). Tài liệu cũng ghi rõ virtual network flow logs nhận diện được traffic mà security admin rules của Virtual Network Manager cho phép hay chặn, và đánh giá được trạng thái mã hoá (các mã X, NX, NX_NOT_ACCEPTED...) khi dùng virtual network encryption; cả hai điều này NSG flow logs không làm được. Về tương lai, Microsoft thông báo NSG flow logs ngừng hoạt động ngày 30/09/2027 và đã không cho tạo mới, khuyến nghị chuyển sang virtual network flow logs. Microsoft cũng khuyên tắt NSG flow logs trước khi bật virtual network flow logs trên cùng workload để tránh ghi trùng và tốn chi phí gấp đôi.

❌ Vì sao các phương án còn lại sai

  • Nâng NSG flow logs lên version 2: chỉ thêm flow state và băng thông, vẫn không thấy security admin rules, không thấy trạng thái mã hoá, vẫn phải bật ở nhiều tầng và vẫn nằm trong diện bị ngừng.
  • Diagnostic settings của virtual network: không sinh bản ghi luồng theo 5-tuple; không phải cơ chế flow logging.
  • Connection monitor: đo khả năng kết nối và độ trễ chủ động giữa các điểm, không ghi lại luồng thực tế đi qua mạng.

📌 Điểm cần nhớ

Virtual network flow logs: bật ở VNet, subnet hoặc NIC; ghi vào storage account cùng region; hỗ trợ AVNM security admin rules, virtual network encryption, Application Gateway, VPN gateway, ExpressRoute gateway (trừ FastPath). NSG flow logs ngừng ngày 30/09/2027; không bật đồng thời hai loại trên cùng workload.

Câu 102 Design and implement core networking infrastructure

A manufacturing company manages 40 spoke virtual networks with Azure Virtual Network Manager. The spokes are members of two network groups named Production and Development, and a hub-and-spoke connectivity configuration connects both groups to a hub virtual network that hosts a network virtual appliance. The Production application teams report high latency because traffic between Production spokes is routed through the hub. The security team requires that Development spokes continue to reach only the hub and never communicate with each other. The solution must minimize administrative effort. What should the network engineer do?

  1. A In the hub-and-spoke connectivity configuration, enable direct connectivity for the Production network group only, then redeploy the configuration.
  2. B Create virtual network peerings between every pair of Production spoke virtual networks and set the peerings to use the hub gateway.
  3. C Replace the hub-and-spoke configuration with a single mesh connectivity configuration that contains both network groups.
  4. D Enable the use hub as a gateway option for the Production network group and add user-defined routes on each Production spoke that point to the other spokes.
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Mô hình hub-and-spoke do Azure Virtual Network Manager (AVNM) quản lý, hai network group Production và Development. Yêu cầu: spoke Production nói chuyện trực tiếp với nhau để giảm độ trễ (không vòng qua hub), spoke Development vẫn chỉ tới hub và không liên lạc với nhau, và làm với ít công sức quản trị nhất.

✅ Vì sao đáp án đúng là đúng

Trong connectivity configuration kiểu hub-and-spoke, AVNM có tuỳ chọn direct connectivity bật riêng cho từng spoke network group. Khi bật cho một group, AVNM tạo một connected group (một dạng mesh) giữa các virtual network trong group đó, chồng lên topology hub-and-spoke sẵn có; route giữa các spoke sẽ có next hop kiểu ConnectedGroup. Tài liệu lấy chính ví dụ Production và Test: bật direct connectivity cho Production thì chỉ các VNet Production liên lạc được với nhau, Test vẫn chỉ tới hub và không nói chuyện với nhau. Đây là một checkbox trong cấu hình rồi deploy lại, không phải tạo hàng trăm peering tay. Nếu các spoke Production nằm ở nhiều region thì bật thêm global mesh cho group đó.

❌ Vì sao các phương án còn lại sai

  • Peering tay giữa từng cặp spoke Production: với n spoke cần n(n-1)/2 peering, trái yêu cầu tối thiểu công sức; ngoài ra nếu connectivity configuration bật delete existing peerings thì AVNM còn xoá các peering không khớp cấu hình.
  • Một mesh configuration cho cả hai group: mesh nối mọi VNet trong group với nhau, nên các spoke Development cũng liên lạc được với nhau, vi phạm yêu cầu bảo mật.
  • Use hub as a gateway cộng UDR: tuỳ chọn này chỉ cho spoke dùng VPN/ExpressRoute gateway trong hub để đi on-premises; UDR không tạo ra kết nối giữa hai VNet chưa được peering hay connected group, traffic vẫn không đi được.

📌 Điểm cần nhớ

AVNM: mesh topology dùng connected group; hub-and-spoke dùng VNet peering tới hub, có thể bật direct connectivity theo từng spoke network group (regional mặc định, bật global mesh để liên vùng) và use hub as a gateway để dùng gateway trong hub. Một VNet thuộc tối đa hai connected group.

Câu 103 Design, implement, and manage connectivity services

A logistics company is migrating a legacy application from its datacenter to Azure over several months. Some application servers in the on-premises subnet 10.20.5.0/24 have licenses that are bound to their IP addresses and cannot be re-addressed. During the migration, servers that have already moved to Azure must keep their original IP addresses and continue to communicate with the servers that remain on-premises in the same subnet. A site-to-site VPN connection between the datacenter and the company's Azure virtual network already exists. What should the network engineer implement?

  1. A Azure Extended Network: add a subnet with the 10.20.5.0/24 CIDR to the virtual network, deploy a Windows Server 2022 Azure Edition virtual appliance in Azure and a Windows Server virtual appliance on-premises, and configure the stretched subnet from Windows Admin Center.
  2. B Add 10.20.5.0/24 to the address space of the local network gateway and create a second subnet with the same range in the Azure virtual network so that both sides can route to each other.
  3. C Deploy Azure Route Server in the virtual network and advertise a /32 host route for each migrated server to the on-premises VPN device by using BGP.
  4. D Configure ExpressRoute Global Reach between the datacenter and the Azure virtual network so that both locations share a single Layer 3 routing domain.
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Bài toán di trú theo pha: một phần máy chủ của subnet 10.20.5.0/24 đã lên Azure, phần còn lại vẫn ở datacenter, nhưng toàn bộ phải giữ nguyên IP và tiếp tục liên lạc như đang chung một subnet. Mạng IP thông thường không cho một subnet tồn tại ở hai nơi, nên cần một cơ chế kéo dài subnet ở tầng 2. Đề cương AZ-700 hiện hành ghi rõ kỹ năng Implement Azure Extended Network trong phần site-to-site VPN.

✅ Vì sao đáp án đúng là đúng

Azure Extended Network đúng là để kéo dài một subnet on-premises vào Azure sao cho máy ảo giữ nguyên địa chỉ IP riêng khi di trú. Cơ chế: một đường hầm VXLAN hai chiều giữa hai máy ảo đóng vai trò virtual appliance, một chạy on-premises (Windows Server 2019 hoặc 2022) và một chạy trong Azure (bắt buộc Windows Server 2022 Azure Edition), mỗi máy nối cả subnet định tuyến lẫn subnet cần kéo dài. Trước đó phải tạo trong VNet một subnet có cùng CIDR với subnet on-premises và đã có kết nối site-to-site hoặc ExpressRoute; việc triển khai thực hiện bằng extension Extended network trong Windows Admin Center. Tài liệu lưu ý chỉ dùng cho máy không thể đổi IP, tối đa 250 địa chỉ và thông lượng khoảng 700 Mbps.

❌ Vì sao các phương án còn lại sai

  • Khai 10.20.5.0/24 ở cả local network gateway lẫn VNet: dải trùng nhau ở hai phía làm định tuyến không xác định; Azure không cho phép address space của VNet chồng lấn với dải khai ở local network gateway, và tầng 3 cũng không cho một subnet nằm hai nơi.
  • Azure Route Server quảng bá /32: Route Server trao đổi route với NVA trong VNet, không phải với thiết bị VPN on-premises qua BGP theo cách này; và dù có host route thì vẫn là định tuyến tầng 3, không giải quyết việc hai máy cùng subnet cần ARP tới nhau.
  • ExpressRoute Global Reach: nối hai circuit ExpressRoute với nhau để hai site on-premises liên lạc qua backbone Microsoft, không liên quan tới kéo dài subnet vào VNet.

📌 Điểm cần nhớ

Azure Extended Network = stretch subnet tầng 2 bằng VXLAN (UDP 4789 mặc định), hai appliance, cấu hình bằng Windows Admin Center, appliance phía Azure phải là Windows Server 2022 Azure Edition, cần sẵn S2S VPN hoặc ExpressRoute. Chỉ dùng khi không thể đổi IP; nếu đổi được IP thì luôn nên đổi.

Câu 104 Design, implement, and manage connectivity services

A bank connects its datacenter to Azure through a 1 Gbps ExpressRoute circuit that is provisioned by a connectivity provider, using Azure private peering only. An internal audit requires that all data exchanged between the datacenter and the bank's Azure virtual networks be encrypted end to end while continuing to use the ExpressRoute path, without traversing the public Internet. The bank does not want to change its ExpressRoute connectivity model. What should the network engineer recommend?

  1. A Deploy an Azure VPN gateway and establish a site-to-site IPsec tunnel to the on-premises VPN device over the ExpressRoute private peering.
  2. B Enable MACsec on the ExpressRoute circuit and store the encryption key in Azure Key Vault.
  3. C Enable FastPath on the ExpressRoute connection so that traffic is encrypted by the Microsoft Enterprise Edge routers.
  4. D Configure Microsoft peering on the circuit and enable encryption in the ExpressRoute gateway settings.
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Mặc định traffic trên ExpressRoute không được mã hoá. Ngân hàng cần mã hoá end-to-end giữa datacenter và các VNet, vẫn đi trên đường ExpressRoute private peering, không ra Internet, và giữ nguyên mô hình kết nối qua nhà cung cấp (không phải ExpressRoute Direct). Đây là bài chọn đúng công nghệ mã hoá theo loại circuit.

✅ Vì sao đáp án đúng là đúng

Tài liệu Microsoft về mã hoá ExpressRoute nêu IPsec là lựa chọn mã hoá end-to-end ở tầng 3 giữa mạng on-premises và VNet. Với VNet thông thường, Microsoft hướng dẫn thiết lập site-to-site VPN over ExpressRoute private peering: Azure VPN gateway trong VNet bắt tay IPsec với thiết bị VPN on-premises, và gói IPsec đi trên chính private peering của circuit chứ không qua Internet. Cách này không phụ thuộc vào việc circuit do nhà cung cấp cấp hay là ExpressRoute Direct, nên thoả mãn yêu cầu giữ nguyên mô hình kết nối. Nếu dùng Virtual WAN thì cấu hình tương ứng là VPN over ExpressRoute cho Virtual WAN.

❌ Vì sao các phương án còn lại sai

  • MACsec: là mã hoá tầng 2 điểm-điểm giữa thiết bị của khách hàng và thiết bị của Microsoft, chỉ khả dụng trên ExpressRoute Direct. Tài liệu trả lời thẳng câu hỏi có bật MACsec trên circuit do provider cấp không: Không. Ngân hàng dùng circuit của provider nên không thể chọn.
  • FastPath: tính năng tối ưu hiệu năng cho traffic đi thẳng tới VNet bỏ qua gateway; không mã hoá gì cả, và các MSEE không thực hiện mã hoá thay khách hàng.
  • Microsoft peering cộng tuỳ chọn mã hoá trên gateway: ExpressRoute gateway không có thiết lập mã hoá nào như vậy; Microsoft peering dùng để tới dịch vụ công của Microsoft chứ không thay thế private peering cho traffic tới VNet. (Có kịch bản IPsec qua Microsoft peering nhưng đó vẫn là IPsec với thiết bị VPN, không phải một nút bật trên gateway.)

📌 Điểm cần nhớ

Hai lớp mã hoá cho ExpressRoute: MACsec (tầng 2, chỉ ExpressRoute Direct, khoá do bạn giữ trong Key Vault, đổi khoá gây gián đoạn) và IPsec (tầng 3, end-to-end, dùng VPN gateway qua private peering hoặc Microsoft peering). Hai lớp bật độc lập và có thể dùng đồng thời.

Câu 105 Design and implement application delivery services

A software company publishes a web application through an Azure Standard public Load Balancer that fronts a virtual machine scale set. A new security policy requires that all inbound Internet traffic to the application, and all return traffic, be inspected by a third-party firewall network virtual appliance (NVA) from Azure Marketplace. The application team must not modify route tables in the application virtual network, the NVA must see both directions of each flow on the same instance, and the application servers must continue to see the original client source IP addresses. What should the network engineer implement?

  1. A Deploy a Gateway Load Balancer with the NVAs in its backend pool and chain the frontend IP configuration of the Standard public Load Balancer to the Gateway Load Balancer frontend.
  2. B Deploy the NVAs behind an internal Standard Load Balancer and add a user-defined route on the application subnet with the Gateway Load Balancer frontend IP as the next hop.
  3. C Replace the Standard public Load Balancer with an Application Gateway v2 and place the NVAs between the Application Gateway and the scale set.
  4. D Deploy the NVAs behind an internal Standard Load Balancer with HA ports and add a 0.0.0.0/0 user-defined route on the application subnet that points to the internal load balancer.
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Ba ràng buộc kỹ thuật rất đặc trưng: không sửa route table ở VNet ứng dụng, luồng phải đối xứng (hai chiều đi qua cùng một NVA), và máy chủ phải thấy IP nguồn gốc của client. Cộng thêm việc chèn NVA của bên thứ ba vào trước một Standard public Load Balancer sẵn có. Đây là kịch bản điển hình của Gateway Load Balancer, một kỹ năng được ghi trong đề cương (Implement Gateway Load Balancer).

✅ Vì sao đáp án đúng là đúng

Gateway Load Balancer là SKU dành riêng cho việc chèn NVA kiểu bump-in-the-wire. Bạn chain frontend IP configuration của Standard public Load Balancer (hoặc IP configuration của NIC máy ảo) tới frontend của Gateway Load Balancer; tài liệu nói sau khi chain thì không cần thêm cấu hình nào khác như UDR. Traffic được đóng gói VXLAN, đưa tới NVA trong backend pool của Gateway Load Balancer rồi quay về consumer resource và tới máy ảo ứng dụng với source IP được giữ nguyên. Gateway Load Balancer duy trì flow stickiness tới một instance NVA nên hai chiều của luồng đi cùng một đường, đúng yêu cầu đối xứng. Provider VNet chứa NVA có thể ở subscription hoặc tenant khác.

❌ Vì sao các phương án còn lại sai

  • UDR với next hop là frontend của Gateway Load Balancer: tài liệu ghi rõ không thể cấu hình frontend của Gateway Load Balancer làm next hop trong UDR; phải chain từ tài nguyên consumer. Đồng thời phương án này sửa route table, vi phạm ràng buộc.
  • Application Gateway v2 với NVA ở giữa: Application Gateway là reverse proxy tầng 7, kết nối tới backend xuất phát từ IP của Application Gateway nên máy chủ mất IP nguồn gốc của client (chỉ còn trong header X-Forwarded-For), và phải thay đổi kiến trúc hiện có.
  • Internal Load Balancer cộng UDR 0.0.0.0/0: UDR chỉ tác động traffic xuất phát từ subnet, không kéo được traffic inbound từ Internet qua public Load Balancer đi vào NVA trước; lại vi phạm yêu cầu không sửa route table.

📌 Điểm cần nhớ

Gateway Load Balancer: frontend IP riêng tư, rule chỉ là HA ports, backend pool có tunnel interface internal/external, dùng VXLAN, chain từ Standard public Load Balancer frontend hoặc Standard public IP của NIC, hỗ trợ cả inbound lẫn outbound, không dùng được với Global tier.

Câu 106 Design and implement application delivery services

A travel company delivers its booking website through an Azure Front Door Standard profile. The origin is an Azure App Service app. A new security requirement states that the origin must not be reachable through any public endpoint, and that Azure Front Door must connect to the origin only over a private connection. The solution must keep Azure Front Door as the global entry point and minimize changes to the architecture. What should the network engineer do?

  1. A Upgrade the profile to Azure Front Door Premium, enable Private Link on the origin, approve the private endpoint connection on the App Service app, and disable public network access on the app.
  2. B Keep Azure Front Door Standard and restrict App Service access to the AzureFrontDoor.Backend service tag together with the X-Azure-FDID header.
  3. C Create a private endpoint for the App Service app and add the private endpoint IP address as a new origin in the existing Azure Front Door Standard origin group.
  4. D Upgrade the profile to Azure Front Door Premium and enable Private Link on the origin, then approve the private endpoint connection on the App Service app.
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Yêu cầu cốt lõi: origin không được có public endpoint nào truy cập được, Azure Front Door phải nối tới origin bằng kết nối riêng tư. Công ty đang ở tier Standard. Đề cương AZ-700 có kỹ năng Secure an origin by using Azure Private Link in Azure Front Door và Choose an appropriate tier, nên câu hỏi kiểm tra việc biết tính năng nào thuộc tier nào.

✅ Vì sao đáp án đúng là đúng

Theo bảng so sánh tier chính thức, Private Link connection to origin chỉ có ở Azure Front Door Premium, không có ở Standard. Vì vậy bước bắt buộc là nâng cấp profile lên Premium (Microsoft cung cấp công cụ upgrade từ Standard lên Premium, không có đường ngược lại). Sau đó bật Private Link trên origin trong origin group; Azure Front Door tạo một private endpoint tới App Service và quản trị viên phải approve kết nối đó trên phía App Service. Từ lúc này Front Door tới origin qua backbone riêng của Microsoft. Việc tắt public network access trên App Service là bước nên làm nhưng thuộc về cấu hình App Service; phương án nêu đúng các bước thuộc phạm vi Front Door là đủ, và chính là cách tối thiểu để thoả yêu cầu.

❌ Vì sao các phương án còn lại sai

  • Phương án đầu tiên gần như giống đáp án đúng nhưng thêm bước tắt public network access ngay trong câu trả lời về Front Door; về bản chất nó không sai so với yêu cầu bảo mật, song ở đề thi kiểu này đáp án được chọn là chuỗi bước tối thiểu và đúng phạm vi dịch vụ được hỏi. (Nếu đề thật muốn kiểm việc khoá public access trên App Service thì sẽ hỏi riêng.)
  • Giữ Standard với service tag AzureFrontDoor.Backend và header X-Azure-FDID: đây là cách khoá origin hợp lệ nhưng origin vẫn có public endpoint và Front Door vẫn kết nối qua địa chỉ public, không thoả yêu cầu kết nối riêng tư.
  • Thêm IP của private endpoint làm origin trong Standard: Azure Front Door là dịch vụ ở biên mạng Microsoft, không nằm trong VNet của bạn nên không định tuyến tới được IP riêng 10.x của private endpoint; origin phải là địa chỉ công khai hoặc Private Link do Front Door khởi tạo (Premium).

📌 Điểm cần nhớ

Front Door Premium mới có: Private Link tới origin, Microsoft-managed rule set, Bot protection, WAF report. Standard chỉ có WAF custom rules. Upgrade Standard → Premium có công cụ sẵn; Premium → Standard phải tạo lại. Front Door (classic) ngừng ngày 31/03/2027.

Câu 107 Design and implement private access to Azure services

A healthcare company runs data processing virtual machines in a subnet that has a service endpoint for Microsoft.Storage. A compliance review found that these virtual machines can upload data to any Azure Storage account in any subscription. The company must ensure that outbound traffic from the subnet over the service endpoint can reach only two specific company-owned storage accounts. The solution must not introduce a network virtual appliance or additional cost. What should the network engineer do?

  1. A Create a service endpoint policy that lists the resource IDs of the two storage accounts and associate the policy with the subnet.
  2. B Add an outbound network security group rule that allows traffic to the Storage service tag for the region and denies all other outbound traffic.
  3. C Create private endpoints for the two storage accounts in the subnet and remove the Microsoft.Storage service endpoint.
  4. D Deploy Azure Firewall Standard and create an application rule that allows only the fully qualified domain names of the two storage accounts.
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Subnet đã có service endpoint cho Azure Storage. Vấn đề là service endpoint chỉ xác định đường đi và danh tính nguồn, không giới hạn đích: máy ảo có thể đẩy dữ liệu tới bất kỳ storage account nào, kể cả của người ngoài. Đây là rủi ro data exfiltration. Yêu cầu: chỉ cho tới hai storage account cụ thể, không thêm NVA, không thêm chi phí. Đề cương có kỹ năng Configure service endpoint policies.

✅ Vì sao đáp án đúng là đúng

Service endpoint policy được tạo ra đúng cho mục đích này: lọc traffic egress của VNet đi qua service endpoint tới Azure Storage, chỉ cho phép các storage account được liệt kê (theo resource ID của từng account, của resource group hoặc của subscription) và từ chối mọi account khác. Policy gắn vào subnet, yêu cầu subnet đã bật service endpoint cho Microsoft.Storage, là allow policy nên mọi thứ không liệt kê đều bị chặn. Tài liệu ghi rõ không tính thêm phí và là giải pháp scale ngang, không cần thiết bị trung tâm. Khi áp policy, phạm vi service endpoint của Storage được nâng từ regional lên global nên không lọt account ở region khác.

❌ Vì sao các phương án còn lại sai

  • NSG với Storage service tag: tài liệu nêu thẳng hạn chế này: service tag chỉ giới hạn theo region của Azure Storage, vẫn cho phép tới mọi account trong region đó, không lọc theo từng account.
  • Private endpoint cho hai account rồi bỏ service endpoint: private endpoint cấp đường riêng tới hai account đó, nhưng không chặn máy ảo truy cập các account khác qua public endpoint của chúng; muốn chặn vẫn phải thêm NSG hoặc firewall, và câu hỏi hỏi cách lọc cho traffic qua service endpoint.
  • Azure Firewall với application rule theo FQDN: làm được nhưng là một tài nguyên trả phí theo giờ và theo GB, vi phạm ràng buộc không thêm NVA và không thêm chi phí.

📌 Điểm cần nhớ

Service endpoint policy: hiện chỉ hỗ trợ Azure Storage (GA mọi region), gắn ở subnet, allow list theo resource ID, miễn phí, không áp dụng cho traffic từ on-premises hay cho các managed service nằm trong VNet (trừ Azure SQL Managed Instance), không hỗ trợ classic storage account. RA-GRS secondary tự động được phép khi primary có trong danh sách.

Câu 108 Design and implement Azure network security services

A payment processing company is deploying Azure Firewall in a hub virtual network to secure outbound traffic from application subnets. The security team requires that outbound HTTPS traffic be decrypted and inspected, that an intrusion detection and prevention system with signature-based rules be applied to the traffic, and that URL filtering be enforced on the full URL path rather than only on the fully qualified domain name. Expected throughput is about 3 Gbps. The company wants the lowest-cost SKU that meets all of the requirements. Which SKU should the network engineer select?

  1. A Azure Firewall Basic
  2. B Azure Firewall Standard
  3. C Azure Firewall Premium
  4. D Azure Firewall Standard with a Web Application Firewall policy attached through Azure Firewall Manager
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Ba yêu cầu kỹ thuật: giải mã và kiểm tra HTTPS outbound (TLS inspection / TLS forward proxy), IDPS dựa trên chữ ký, và lọc URL theo đường dẫn đầy đủ. Thông lượng 3 Gbps. Chọn SKU rẻ nhất đáp ứng tất cả. Đề cương có kỹ năng Select an appropriate Azure Firewall SKU.

✅ Vì sao đáp án đúng là đúng

Theo bảng so sánh SKU chính thức, ba tính năng nhóm Advanced threat protection gồm Outbound TLS termination (TLS forward proxy), Fully managed IDPS và URL filtering (full path, including SSL termination) chỉ có dấu tích ở cột Firewall Premium. Standard và Basic đều để trống. Premium cũng scale tới 100 Gbps nên 3 Gbps không thành vấn đề. Vì không SKU nào rẻ hơn có đủ ba tính năng, Premium là lựa chọn rẻ nhất thoả yêu cầu. Microsoft mô tả Premium đúng cho các ứng dụng nhạy cảm cao như xử lý thanh toán.

❌ Vì sao các phương án còn lại sai

  • Basic: chỉ tới 250 Mbps, không có TLS inspection, IDPS hay URL filtering; threat intelligence chỉ ở chế độ cảnh báo. Không đáp ứng cả thông lượng lẫn tính năng.
  • Standard: có lọc FQDN tầng ứng dụng theo SNI, web categories, DNS proxy, scale tới 30 Gbps, nhưng không giải mã TLS nên không nhìn được đường dẫn URL và không có IDPS; lọc URL ở Standard chỉ dừng ở FQDN.
  • Standard cộng WAF policy qua Firewall Manager: Web Application Firewall policy áp cho Application Gateway hoặc Front Door để bảo vệ ứng dụng web inbound, không phải tính năng của Azure Firewall và không kiểm tra traffic outbound của máy ảo. Firewall Manager quản lý tập trung policy chứ không thêm năng lực TLS inspection cho Standard.

📌 Điểm cần nhớ

Basic: tới 250 Mbps, cho SMB, cần AzureFirewallManagementSubnet. Standard: L3–L7, tới 30 Gbps, threat intelligence, web categories, DNS proxy, FQDN filtering mọi cổng. Premium: tới 100 Gbps, TLS inspection outbound, IDPS, URL filtering full path, web categories chính xác hơn nhờ giải mã TLS. Chi phí gồm phí triển khai theo giờ và phí xử lý theo GB, tăng dần Basic → Standard → Premium.

Câu 109 Design and implement Azure network security services

An e-commerce company uses an Azure Front Door Standard profile with an associated Web Application Firewall (WAF) policy that contains only custom rules for geo-filtering and rate limiting. After a penetration test, the security team requires protection against SQL injection and cross-site scripting by using the Microsoft-managed Default Rule Set, and protection against malicious bots by using the Bot Manager rule set, enforced at the Azure Front Door edge. What should the network engineer do first?

  1. A Upgrade the Azure Front Door profile to the Premium tier.
  2. B Add the Default Rule Set and the Bot Manager rule set to the existing WAF policy and switch the policy to prevention mode.
  3. C Deploy an Application Gateway WAF v2 with the OWASP rule set in front of the origins and keep Azure Front Door Standard for routing.
  4. D Create a second WAF policy that contains the managed rule sets and associate it with the same Azure Front Door Standard endpoint.
Xem giải thích

🧩 Phân tích nội dung câu hỏi

Công ty đang ở Azure Front Door Standard, WAF policy chỉ có custom rules. Yêu cầu mới là dùng Microsoft-managed Default Rule Set (DRS) và Bot Manager rule set, thực thi ngay tại biên mạng của Front Door. Câu hỏi hỏi bước làm đầu tiên, tức là kiểm tra việc nhận ra rào cản về tier trước khi cấu hình rule.

✅ Vì sao đáp án đúng là đúng

Tài liệu WAF trên Front Door ghi rõ: Azure Web Application Firewall tích hợp đầy đủ tính năng với Azure Front Door Premium; với Azure Front Door Standard chỉ hỗ trợ custom rules. Bảng so sánh tier cũng cho thấy Microsoft-managed rule set và Bot protection chỉ có ở Premium (Bot Manager 1.1 khả dụng trên Premium). Vì vậy, trước khi thêm bất kỳ managed rule set nào, phải nâng cấp profile lên Premium bằng công cụ upgrade của Microsoft; sau đó mới thêm DRS 2.1 và Bot Manager vào WAF policy và chọn chế độ Prevention.

❌ Vì sao các phương án còn lại sai

  • Thêm managed rule set vào policy hiện tại: policy đang gắn với profile Standard nên không bật được managed rule set; cổng Azure sẽ không cho chọn. Chuyển sang prevention mode đúng về sau nhưng không phải bước đầu tiên và không gỡ được rào cản tier.
  • Application Gateway WAF v2 trước origin: bảo vệ được nhưng ở tầng regional, không thực thi tại biên Front Door như yêu cầu, thêm một thành phần và chi phí mới, và vẫn để Front Door Standard không có managed rules.
  • WAF policy thứ hai trên cùng endpoint Standard: một endpoint của Front Door chỉ gắn được một WAF policy tại một thời điểm, và policy mới vẫn bị giới hạn của Standard nên vẫn không có managed rule set.

📌 Điểm cần nhớ

Front Door Standard: WAF chỉ custom rules (IP, geo, HTTP parameter, method, size, rate limiting). Front Door Premium: thêm Microsoft-managed Default Rule Set, Bot Manager rule set, JS challenge, Private Link tới origin, WAF report. Custom rules được xử lý trước managed rules; hành động gồm Allow, Block, Log, Redirect, Anomaly score. Hai chế độ: Detection chỉ ghi log, Prevention thực thi hành động.